electrical ratings (encoder) | |
---|---|
Voltage supply | 9...30 VDC 5 VDC ±5 % 9...26 VDC |
Consumption w/o load | ≤100 mA |
Pulses per revolution | 25 … 5000 |
Phase shift | 90 ° ±20° |
Duty cycle | 40…60 % |
Reference signal | Zero pulse, width 90° |
Output frequency | ≤120 kHz (≤300 kHz on request) |
Output signals | K1, K2, K0 + inverted |
Output stages | K1, K2, K0 + invertedHTL-P (power linedriver) TTL/RS422 |
Sensing method | Optical |
electrical ratings (tachogenerator) | |
Reversal tolerance | ≤0,1 % |
Linearity tolerance | ≤0,15 % |
Temperature coefficient | ± 0,05 %/K (open-circuit) |
Isolation class | B |
Calibration tolerance | ±1 % |
Climatic test | Humid heat, constant (IEC 60068-2-3, Ca) |
Performance | Humid heat, constant (IEC 60068-2-3, Ca)TDP: 12 W (speed ≥3000 rpm) TDPZ: 2x 3 W (speed ≥3000 rpm) |
Armature-circuit time-constant | <75 40 µs (TDPZ) |
Open-circuit voltage | <75 40 µs (TDPZ)TDP: 10...150 mV per rpm TDPZ: 20...100 mV per rpm |
mechanical design | |
Size (flange) | ø115 mm |
Shaft type | ø11 mm solid shaft |
Admitted shaft load | ø11 mm solid shaft≤60 N axial ≤80 N radial |
Flange | ø11 mm solid shaft≤60 N axial ≤80 N radialEURO flange B10 Housing foot B3 |
Protection DIN EN 60529 | IP 55 |
Operating speed | ≤10000 rpm |
Torque | 1,5 Ncm |
Rotor moment of inertia | 1,5 Ncm 1,4 kgcm² (TDP) 1,5 kgcm² (TDPZ) |
Material | 1,5 Ncm 1,4 kgcm² (TDP) 1,5 kgcm² (TDPZ)Housing: aluminium die-cast Shaft: stainless steel |
Operating temperature | 1,5 Ncm 1,4 kgcm² (TDP) 1,5 kgcm² (TDPZ)Housing: aluminium die-cast Shaft: stainless steel-30...+100 °C -25...+100 °C (>3072 pulses per revolution) |
Resistance | 1,5 Ncm 1,4 kgcm² (TDP) 1,5 kgcm² (TDPZ)Housing: aluminium die-cast Shaft: stainless steel-30...+100 °C -25...+100 °C (>3072 pulses per revolution)IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms |
Connection | 2x terminal box |
Weight approx. | 2x terminal box3,3 kg (TDP) 3,5 kg (TDPZ) |
Interference immunity | EN 61000-6-2 |
Emitted interference | EN 61000-6-3 |
Approval | CE |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |